Product ID:EC-2216-B GRAY EPOXY ADHESIVE
MSDS Date:12/21/1988
FSC:8040
NIIN:00-152-0010
MSDS Number: BGWZF

3M ADHESIVES,COATINGS AND SEALERS DIVISION

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 04963

3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV

SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 70-80%

KAOLINITE (ALUMINUM SILICATE)

CAS: 1318-74-7

Fraction By Weight: 20-30%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE NOTED BY MANUFACTURER.
Effects of Overexposure:EYES:IRRITATION. SKIN:IRRITATION,ALLERGIC SKIN
REACTION. INHALATION:IRRITATION. INGESTION:IRRITATION.
Medical Cond Aggravated by Exposure:NONE NOTED.

First Aid:EYES:FLUSH WITH PLENTY OF WATER FOR 15 MINUTES.SEE DOCTOR.
SKIN:REMOVE CONTAMINATED CLOTHING.WASH WITH SOAP AND WATER.
INHALATION:REMOVE TO FRESH AIR.SEE DOCTOR. INGESTION:DO NOT INDUCE
VOMIT.SEE DOCT

Extinguishing Media:FOAM,DRY CHEMICAL,CARBON DIOXIDE,WATER FOG.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:VENTILATE AREA.WEAR RESPIRATOR AND PROTECTIVE
CLOTHING,INCLUDING GLOVES AND SAFETY GLASSES.COLLECT SPILLED
MATERIAL.PLACE IN A DOT APPROVES METAL CONTAINER AND SEAL.

Handling and Storage Precautions:THIS IS PART B.PRECAUTIONS FOR EACH
PART SHOULD BE OBSERVED WHEN SEPARATE OR MIXED.KEEP CONTAINER
CLOSED WHEN NOT IN USE.
Other Precautions:USE ONLY WITH SUFFICIENT VENTILATION.AVOID BREATHING
VAPORS DURING HEAT CURING.CURING OVENS SHOULD BE VENTED
PROPERLY.AVOID EYE AND SKIN CONTACT.

Respiratory Protection:USE ONLY WITH SUFFICIENT VENTILATION.
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH AFTER HANDLING.WASH CONTAMINATED CLOTHING
BEFORE REUSE.
Supplemental Safety and Health
THIS NSN IS FOR PART B ONLY,ADHESIVE. NSN FOR KIT OF PARTS A & B IS
8010-01-187-3578.

HCC:M1
Spec Gravity:1.33
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:OFF-WHITE,CREAMY PASTE,VERY SLIGHT EPOXY ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE NOTED.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,SMOKE.

Waste Disposal Methods:MIX PART A WITH PART B.COMPLETELY CURE AND
DISPOSE OF FULLY CURED WASTE PRODUCT.INCINERATE UNCURED BULK
PRODUCT AFTER MIXING WITH FLAMMABLE MATERIAL.DISPOSAL SHOULD BE IN
ACCORDANCE WITH APPLICABLE F EDERAL,STATE AND LOCAL ENVIRONMENTAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.